Read "Practical Skunk Raising" by William Edwin Pratt online for free on Textopian. Full text with search, annotations, highlights, and AI-powered reading aids.
An inexpensive fence to begin with may be made by setting posts in the ground close together, but strongly. I recommend a fence made of wire netting or steel set or inbedded in the ground from one to two feet. First, dig a trench about one foot wide and two feet deep, and put heavy rock in the bottom and thus, with the rock below the wire there will be no way that the skunks can escape by digging.
The posts should be set ten feet apart. If set farther the wire will have a tendency to sag. The wire should be of one and a half inch mesh for the main fence, and one inch mesh for the breeding yards, as young skunks sometimes escape through a one and a half inch mesh. No. 16, or 18, gauge wire from four to eight feet in height should be used. Any smaller gauge than the above mentioned is not durable enough.